Solenoid Valve for TR-1001 governor 12VDC also fits Teleflex Engine Governor. This solenoid valve is used to repair the following conditions. Governor not turning on or off. Governor leaking fuel from the top on the unit. If your yellow coil turns black and is working you do not need to replace the unit. Special care needs to be taken when replacing the solenoid. Please follow the enclosed directions. The two biggest problems when installing the solenoid is the steel plate on the diaphragm needs to be located on top facing away from the governor. The second is the spring goes in the plunger with the tight windings showing. This goes in the shaft with the rubber plunger down. It should bounce under finger pressure when installed correctly. The rubber must make contact with the steel plate on the diaphragm for this to work correctly. Instructions. https://www.apexinds.com/blog/solenoid-valve-replacement-on-the-tr-1001/
